Plasma-transferred-arc-powder-welding (PTA) has a very high energy density. This reduces the heat-input and gives the possibility of a variable, reproducible diffusion zone.
A non-transferred arc (pilot-arc) is ignited between the tungsten electrode and the water-cooled copper-anode using high frequency. This pilot arc usually burns permanently during operation.
For welding an additional arc between the tungsten electrode and the work-piece is used. As plasma-gas and pilot-gas a protective gas (mainly argon) is used.
The PTA powder (additionally a wire may be used) is fed into the transferred arc and is welded on the substrate.
WISDOM use only inverter power supplies. They have a much higher efficiency and less power consumption than other types of powers supplies.
The main applications for PTA welding are:
- Valve-seats and –cones in combustion engines
- Cladding of tools
- Turbine-blades
- Sliding and sealing surfaces of armatures (gas, water and acid)
- Plungers and moulds in the glass-industry
- Pump parts, etc.
WISDOM main PTA types as below:
-
- WD Item
- Description
- Application
- PTA Welding Machine
- Laser Cladding Machine