SS420 powder

PRODUCT

Introduction

S420 powder is a stainless steel powder that is optimized for wear resistance while still offering fairly good corrosion resistance in general atmospheric and industrial environments.These coatings are hard, making them suitable for applications where wear resistance is required and for dimensional repair of steel parts.They are recommended to be used at temperatures below 540 °C (1000 °F).

Equivalent: Metco 1002

Chemical Composition

Fe

Cr

Mn

C

SiPS

Balance

12-14%

1.0%max

0.15%min

1.0%max 0.03%max 0.03%max

Physical Properties

Morphology

Working Temperature

Production Method

irregular

≤ 540°C

Water Atomized

Plasma Spraying

Plasma spray is a thermal spray coating process used to produce a high quality coating by a combination of high temperature, high energy heat source, a relatively inert spraying medium, usually argon, and high particle velocities.

Application

1、Resist abrasive grains (low temperature):
crankshaft bearings,cylinder liners, pistons, pump plungers,  hydraulic rams

2、Resist fretting (intended or non-intended motion):
machine bedways,  press fits bearing seats,wear rings

3、Salvage and build-up of grindable steels:
mis-machined parts, worn parts

Standard Packing

5kg/bottle 4 bottles/box

Label

Brand,Neutral or Customized

Delivery

Courier/Air/Sea

Delivery time:According to your order quantity.

Leave message

Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.

  • *