Pure Zn

INTRODUCTION

Zinc is 99.99% pure, and is not contaminated in the arc spray process. Zinc alloy wire sprayed coatings are integral steps in the manufacture of various electronic, capacitor, automotive, heat exchange and tube & pipe products. Thermal spray Zinc based alloy wire coatings are also used in the Corrosion protection of bridges, locks & dams, above ground storage tanks, light poles, and other critical infrastructure.

Equivalent to: Tafa02Z, Metco Zinc , PMET540

CHEMICAL COMPOSITION%

Type

Chemical composition

Zn

Al

Others

Zn 99.9+

Balance

-

0.1

Deposit Characteristics

Typical Hardness
Bond Strength
 Deposit Rate
Deposit Efficiency
Machinability
HRB 20-30
6.9-15.0 Mpa
24 lbs/hr/100A
0.7
Good

Diamenter (mm)

1.6mm , 2.0mm , 3.17mm , 4.76mm

Advantage:

Resonable price, in stock for regular sizes, short lead time

International production technology, quality guaranteed

100% replacement / refund (delivery included) for problematic items

Spray process

Arc Spray

Arc spraying is the use of electric arc burning in two consecutive fed between the wires to melt the metal, with a high velocity gas stream molten metal atomization, and the atomization of the sprayed metal particles so that they accelerate the work to form a coating technology .

Flame Spray

The use of a flame as the heat source, the metal and non-heated to a molten state, forming a mist flow in the state of high-speed air jet to the substrate, the injection of the molten minute particles impact upon the substrate above, plastic deformation, into a sheet shape superimposed sedimentary layers.

Application

Zinc wire is widely used in thermal spray corrosion, containers, bridges, derrick, storage tanks, power tower, tower, capacitors, metal stents, ductile iron pipe, transportation equipment, such as zinc spray preservative industry.

Packing and shipping

STANDARD SIZE&PACKING

Diameter

Dimension Tolerance

Packing

Wire Weight

1/16"(1.6mm)

+0/-0.05

D 300 Spool

15kgs(33 lbs)/spool

2.0mm

+0/-0.05

D 300 Spool

15kgs(33 lbs)/spool

1/8"(3.17mm)

+0/-0.05

D 300 Spool/Coil Form/Drum

15kgs(33 lbs)/spool 20-400kgs/coil Drum

4.76mm

+0/-0.05

D 300 Spool/Coil Form/Drum

15kgs(33 lbs)/spool 20-400kgs/coil Drum

Label

Brand, Neutral or Customized

Delivery

Courier/Air/Sea

Normally we keep stock of 1.6mm, can deliver in 1-3 days.

For mass order, delivery time is depends on the quantity.

Leave message

Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.

  • *