Inconel625

INTRODUCTION

Inconel 625 is a nickel as a main component of super alloys. From molybdenum, niobium solid solution strengthening effect of nickel-chromium alloy contained at a low temperature to 1093 ℃, with ultra-high strength, exceptional fatigue resistance, commonly specifications used for thermal spray is 1.6mm, 2.0mm, 3.17mm.

Equivalent to: TaFa 71T  ,PMET 860 ,Metco  8625

CHEMICAL COMPOSITION

Grade

Ni%

Cr%

Mo%

Nb+Ta%

Fe%

Inconel 625

Min 58

20-23

8~10

3.15-4.15

Max 5

Deposit Characteristics

Grade

Density

Melting Point

Inconel 625

8.4g/cm3

1290°C-1350°C

Typical Deposit Characteristics

Typical Hardness

Bond Strength

Deposit RateDeposit EfficiencyMachine Ability

HRB 92

7000 psi

11 lbs/hr/100A 70% Good

Diamenter (mm)

1.6, 2.0 , 3.17

Advantage:

1. Reasonable price, regular sizes stock, short delivery time;

2. International production technology, quality guaranteed;

3. 100% replacement / Refund for problematic items;

Production process

Spray process

Arc Spray

Arc spraying is the use of electric arc burning in two consecutive fed between the wires to melt the metal, with a high velocity gas stream molten metal atomization, and the atomization of the sprayed metal particles so that they accelerate the work to form a coating technology .

Flame Spray

The use of a flame as the heat source, the metal and non-heated to a molten state, forming a mist flow in the state of high-speed air jet to the substrate, the injection of the molten minute particles impact upon the substrate above, plastic deformation, into a sheet shape superimposed sedimentary layers.

Application

Backing material used for Arc spray

Inconel 625 is a nickel as a main component of super alloys. From molybdenum, niobium solid solution strengthening effect of nickel-chromium alloy contained at a low temperature to 1093 ℃, with ultra-high strength, exceptional fatigue resistance.

Backing material used for Flame spray

Although the alloy for high temperature strength and design, but the alloy chromium, high molybdenum content for a number of corrosive media, from highly oxidizing environment to general corrosion environment, are highly pitting anti-corrosion fission, performance a superior corrosion resistant properties.

Application

To chloride contaminated media such as sea water, ground water, neutral salt and brine, INCONEL 625 also has superior corrosion resistance. Mainly used in aviation engine parts, jet engines, aerospace structural components, chemical equipment, bellows compensator expansion joint, modern garbage treatment equipment, contacts, sea and withstand high mechanical stress of the occasion, marine structures, saline environment.

Packing and shipping

Packaging

STANDARD SIZE&PACKING

Diameter

Dimension Tolerance

Packing

Wire Weight

1/16"(1.6mm)

+0/-0.05

D 300 Spool

15kgs(33 lbs)/spool

2.0mm

+0/-0.05

D 300 Spool

15kgs(33 lbs)/spool

1/8"(3.17mm)

+0/-0.05

Coil Form

20-400kgs/coil

Other sizes can be produced based on customers’ requirement.

Label

Brand, Neutral or Customized

Delivery

Courier/Air/Sea

Normally we keep stock of 1.6mm and we can delivery in 1-3 days.

For mass order, delivery time depends on the quantity.

Leave message

Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.

  • *