CuZn40SnSi

INTRODUCTION 

CuZn40SnSi is suitable for padding material of gas-welding and arc spray in Brass. Can also be used in brazing of copper, steel, cast iron, copper-nickel and carbide cutting tools incrustation.

CHEMICAL COMPOSITION

Standard

Class

Alloy

Cu%

Fe%

Mn%

Si%Sn%Zn%Other
BS EN14640

Cu4641

CuZn40SnSi 58.5

0.8

0.1

0.1 0.95 Rest <0.5

Typical Physical Properties

Solids Temperature
Density
ElongationLiquids TemperatureTensile StrengthBrinell Hardness
890°C 8.4kg/dm3 30% 910°C 381N/mm2 88HB

Advantage:

Resonable price, in stock for regular sizes, short lead time

International production technology, quality guaranteed

100% replacement / refund (delivery included) for problematic items

Spray process

Arc Spray

Arc spraying is the use of electric arc burning in two consecutive fed between the wires to melt the metal, with a high velocity gas stream molten metal atomization, and the atomization of the sprayed metal particles so that they accelerate the work to form a coating technology .

Flame Spray

The use of a flame as the heat source, the metal and non-heated to a molten state, forming a mist flow in the state of high-speed air jet to the substrate, the injection of the molten minute particles impact upon the substrate above, plastic deformation, into a sheet shape superimposed sedimentary layers.

Application

Brazing of copper, steel, cast iron

Cutting tools

Packing and shipping

STANDARD SIZE&PACKING

Diameter

Dimension Tolerance

Packing

Wire Weight

1/16"(1.6mm)

+0/-0.05

D 300 Spool

15kgs(33 lbs)/spool

2.0mm

+0/-0.05

D 300 Spool

15kgs(33 lbs)/spool

1/8"(3.17mm)

+0/-0.05

Coil Form

20-400kgs/coil

Other sizes can be produced based on customers’ requirement.

Label

Brand, Neutral or Customized

Delivery

Courier/Air/Sea

Normally we keep stock of 1.6mm, can deliver in 1-3 days.

For mass order, delivery time is depends on the quantity.

Leave message

Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.

  • *