Babbitt wire

INTRODUCTION

Babbitt alloys remain consistent from edge-to-edge and end-to-end through thousands of pounds of ingots and bars, and through thousands of miles of spray wire.
Babbitt formulations meet or exceed their engineering standards. With higher productivity, less rework, less cleanup. Fewer defects and higher quality finished products.The coatings are ductile, low in oxides and exhibit a bright,metallic appearance.

Equivalent to: TAFA 04T, Metco Sprababbitt , PMET 542

CHEMICAL COMPOSITION%

Deposit Characteristics

Typical Deposit Characteristics

Physical Properties

Diamenter

1.6mm , 2.0mm , 2.3mm , 3.0mm , 3.17mm

Advantage:

1. Reasonable price, regular sizes stock, short delivery time;

2. International production technology, quality guaranteed;

3. 100% replacement / Refund for problematic items;

Production process

Spray process

Arc Spray

Arc spraying is the use of electric arc burning in two consecutive fed between the wires to melt the metal, with a high velocity gas stream molten metal atomization, and the atomization of the sprayed metal particles so that they accelerate the work to form a coating technology .

Flame Spray

The use of a flame as the heat source, the metal and non-heated to a molten state, forming a mist flow in the state of high-speed air jet to the substrate, the injection of the molten minute particles impact upon the substrate above, plastic deformation, into a sheet shape superimposed sedimentary layers.

Application

Backing material used for Arc spray

Suitable for electric arc spraying of babbitt lead based bearing alloy.

Backing material used for Flame spray

Babbitt and other alloy products has high performance, high wear resistance, corrosion resistance, seismic, pressure, and other prominent environmental advantages and technological advantages.

Coating performance

Mainly used in cement machinery, steel, machinery, petroleum machinery, chemical machinery, turbine machinery, power generation machinery, mining machinery, metallurgical machinery, compression pad machinery, shipbuilding, machinery and so on large-scale equipment, bearings, bushings, bushings.

Packing and shipping

Packaging

STANDARD SIZE&PACKING

Other sizes can be produced based on customers’ requirement.

Label

Brand, Neutral or Customized

Delivery

Courier/Air/Sea

Normally we keep stock of 1.6mm and we can delivery in 1-3 days.

For mass order, delivery time depends on the quantity.