Amorphous Alloy (P)

INTRODUCTION

Amorphous Alloy (P) is a cored wire specifically designed for arc spray systems. It produces a partially amorphous, hard, abrasive and corrosion resistant coating, with a service environment up to 1600 degrees F. High chrome like finishes can be obtained by typical grinding and lapping techniques. It has found use in a wide variety of high wear applications, anti-skid surfacing applications, and corrosive environments. The addition of 9% nickel gives it greater corrosion resistance than FeCrBSi (P) for most environments.

Equivalent

TAFA 90 MXC

CHEMICAL COMPOSITION

Typical Deposit Characteristics

Diamenter (mm)

1.6, 2.0

Advantage

1. Reasonable price, regular sizes stock, short delivery time

2. International production technology, quality guaranteed

3. 100% replacement / Refund for problematic items

Production process

Spray process

Arc Spray

Arc spraying is the use of electric arc burning in two consecutive fed between the wires to melt the metal, with a high velocity gas stream molten metal atomization, and the atomization of the sprayed metal particles so that they accelerate the work to form a coating technology .

Application

Boiler Tubes & Tube Shields

Rolls

Anti-Skid

Packing and shipping

Packaging

STANDARD SIZE&PACKING

 Other sizes can be produced based on customers’ requirement.

Label

Brand, Neutral or Customized

Lead time

For mass order, lead time depends on quantity

100-200kg: 1 week

Delivery

Courier, Air, Sea